- 1. Find the best location
- 2. Fasten the mounting bracket to the pipe
- 3. Mount the top section of the HS38
- 4. Attach the lower section of the unit
- 5. Remove the metal pin
- 6. Power the unit with the power adapter supplied
The best place to install your HS38 electronic water conditioner is on the cold water pipe that feeds the boiler or hot water tank. Make sure that you have a power outlet close by, and that there are no groundwires attached to the pipe in very close proximity. One more thing to consider is to have a clear view of the HS-38 red light. It will be the indicator that the unit is performing as it should.
Use a screwdriver
You will hear a "click" sound when you push it firmly into the bracket to let you know that the body of the HS38 is in place
Holding the top section with one hand, clip the lower section on with the other hand.
It is very important that once the bottom part is in position, you withdraw the split pin from the unit
Plug it into the unit then into any regular power outlet.